WEARtig Co 1 TIG Rods Importer, Stockist & Supplier Worldwide
Shanti Metal Supply Corporation (SMSC) welcomes enquiries for WEARtig Co 1 TIG Rods for industrial hardfacing and wear-protection requirements. Contact our team to discuss product identification, sizes, quantities, technical documentation and international supply.
Buyers searching for a WEARtig Co 1 TIG Rods importer, stockist, supplier or exporter can submit their project requirements to SMSC. Final suitability should always be confirmed against the manufacturer's current technical datasheet and an approved welding procedure.
Quick Answer: What Are WEARtig Co 1 TIG Rods?
WEARtig Co 1 TIG Rods are cobalt-alloy hardfacing consumables designed for wear-resistant overlays. Published product documentation identifies the AWS A5.21 classification as ER CoCr-C and the EN 14700 classification as R Co3. The listed pure weld-deposit hardness is approximately 54–56 HRC.
The product is described for applications where abrasion combines with corrosion and elevated temperatures. Manufacturer literature mentions operating temperatures up to 900°C, depending on service conditions. Always verify the specific operating environment and welding procedure before use.
WEARtig Co 1 TIG Rods – Product Overview
WEARtig Co 1 is a cobalt-chromium-tungsten hardfacing alloy. It is used to produce wear-resistant overlays on suitable industrial components. The selection of a hardfacing consumable should account for the type of wear, base material, component design, operating temperature, corrosion exposure and repair procedure.
Published typical rod analysis lists carbon at 2.3%, chromium at 32%, tungsten at 13% and cobalt as the balance. These are typical published values, not a substitute for batch-specific certification or the current manufacturer datasheet.
SMSC welcomes product enquiries from industrial fabricators, maintenance contractors, engineering firms, distributors and project procurement teams. Please provide the product designation, required size, quantity, destination and documentation requirements when requesting a quotation.
WEARtig Co 1 TIG Rods – Technical Specifications
| Property | Specification / Details |
|---|---|
| Product Name | WEARtig Co 1 TIG Rods |
| Product Type | Cobalt-alloy TIG hardfacing rod |
| AWS Classification | ER CoCr-C, AWS A5.21 |
| EN 14700 Classification | R Co3 |
| Typical Rod Analysis | C 2.3%, Cr 32%, W 13%, Co balance |
| Pure Weld-Deposit Hardness | Approximately 54–56 HRC |
| Hardness at 600°C | Published product documentation gives approximately 42 HRC and 34 HRC figures; confirm the relevant test condition and current datasheet before technical use. |
| Listed TIG Rod Size | 3.2 × 1000 mm; confirm current availability with SMSC |
| Current and Polarity | DC negative (DC−), as listed in product documentation |
| Shielding Gas | I1 / argon, subject to the current datasheet and welding procedure |
| Supplier | Shanti Metal Supply Corporation (SMSC) |
Classification and Standards
Classification helps buyers identify the intended consumable and check compliance with a project specification. The published classification for WEARtig Co 1 is ER CoCr-C under AWS A5.21 and R Co3 under EN 14700.
| Verification Item | Reference |
|---|---|
| Product Designation | WEARtig Co 1 |
| AWS Specification / Classification | AWS A5.21 / ER CoCr-C |
| EN Classification | EN 14700 / R Co3 |
| Product Identification | Check the full designation on the packaging and current manufacturer datasheet. |
| Project Acceptance | Confirm compatibility with the base material, service conditions, drawings and approved welding procedure. |
Chemical Composition
The published typical rod analysis for WEARtig Co 1 identifies carbon, chromium, tungsten and cobalt. Values below are typical published data and must not be treated as batch-specific chemical certification.
| Element | Typical Analysis |
|---|---|
| Carbon (C) | 2.3% |
| Chromium (Cr) | 32.0% |
| Tungsten (W) | 13.0% |
| Cobalt (Co) | Balance |
Mechanical Properties
The main published hardness reference for the pure weld deposit is approximately 54–56 HRC. Hardness at elevated temperature and other deposited-metal properties depend on the test conditions and should be interpreted using the manufacturer's documentation.
| Property | Published Reference / Guidance |
|---|---|
| Pure Weld-Deposit Hardness | Approximately 54–56 HRC |
| Hardness at 600°C | Published data lists approximately 42 HRC and 34 HRC values; confirm which test condition each value represents. |
| Wear Performance | Designed for hardfacing applications involving abrasion alongside corrosion and elevated temperatures. |
| Other Mechanical Properties | Confirm from current technical literature; do not infer tensile strength, yield strength or elongation from hardness alone. |
Welding Parameters and Recommendations
Follow the current manufacturer's instructions and a qualified welding procedure. Published product documentation calls for a clean welding area, preheating to 500–600°C and very slow cooling. These are technical instructions that must be checked against the component, base material and current datasheet before implementation.
| Parameter | Guidance |
|---|---|
| Process | TIG / GTAW hardfacing; confirm procedure suitability. |
| Current and Polarity | DC negative (DC−), as listed for TIG in the published datasheet. |
| Shielding Gas | I1 / argon; confirm gas purity, flow rate and coverage from the approved procedure. |
| Surface Preparation | Clean the welding area thoroughly and remove contaminants before welding. |
| Preheating | Published instruction: 500–600°C. Confirm suitability for the specific workpiece and base material. |
| Cooling | Published instruction calls for very slow cooling. Follow the approved procedure. |
| Oxyacetylene Use | Manufacturer documentation describes adjustment to an excess-acetylene / reducing flame for oxyacetylene welding; verify the current instructions. |
Applications of WEARtig Co 1 TIG Rods
WEARtig Co 1 is described for hardfacing components exposed to combinations of abrasion, erosion, corrosion, cavitation, pressure and elevated temperatures. Typical application areas mentioned in product documentation include:
- Working parts used in the chemical industry.
- Running and sealing surfaces of industrial fittings.
- Valve seats and cones for combustion engines.
- Cutting and shredding tools.
- Heavy-duty hot-working tools where thermal shock is not expected.
- Milling, mixing and drilling tools.
- Components requiring cobalt-alloy wear-resistant overlays.
These examples do not mean the consumable is suitable for every operating environment. Confirm the actual wear mechanism, temperature, base material and repair method before specifying the product.
Base-Material Compatibility
Hardfacing selection should be based on the component material, its condition, design and service requirements. Confirm the manufacturer's recommendations before welding WEARtig Co 1 onto a specific base metal.
- Identify the base-metal grade and condition.
- Check whether the component is suitable for the specified preheat and cooling requirements.
- Review the approved welding procedure and applicable project code.
- Consider dilution, overlay thickness, machining and final surface requirements.
- Confirm inspection, traceability and certificate requirements before ordering.
Quality and Documentation
For technical approval, buyers should request and review the current manufacturer datasheet and applicable product identification or batch documentation. Where a project requires certification, state the document type in the enquiry and confirm availability before purchase.
- Current product technical datasheet.
- Product designation and classification confirmation.
- Batch identification and traceability, where applicable.
- Project-specific inspection or certification requirements.
- Confirmation of size, quantity and packaging.
Storage and Handling
Store welding rods in clean, dry conditions and protect them from moisture, oil, dust and other contamination. Keep products in their original labelled packaging until use and follow the manufacturer's storage and handling instructions. Consult the responsible welding engineer if packaging is damaged or product identification is unclear.
WEARtig Co 1 TIG Rods Supplier for Worldwide Markets
SMSC welcomes enquiries for WEARtig Co 1 TIG Rods from India and international markets. Buyers should provide the product designation, required size, quantity, delivery location and applicable technical specification so that the requirement can be reviewed.
Supplier in the United Arab Emirates
Industrial buyers in the UAE, including Dubai, Abu Dhabi, Sharjah and other industrial locations, can contact SMSC with WEARtig Co 1 TIG Rods requirements. Availability, documentation and shipping arrangements are confirmed for each enquiry.
Supplier in Saudi Arabia
Companies in Riyadh, Jeddah, Dammam and other Saudi Arabian industrial centres can submit enquiries for cobalt-alloy hardfacing TIG rods. Include the required size, quantity, delivery destination and technical requirements.
Supplier in Qatar
Procurement teams in Doha and other locations in Qatar can contact SMSC for WEARtig Co 1 product enquiries and quotation requests, subject to availability and destination requirements.
Supplier in Oman
Buyers in Muscat, Sohar, Salalah and other locations in Oman can send product enquiries with the complete designation, quantity and project documentation requirements.
Supplier in Kuwait
Industrial buyers in Kuwait can request quotation and availability information for WEARtig Co 1 TIG Rods. Product suitability must be confirmed against the current manufacturer data.
Supplier in Bahrain
SMSC welcomes enquiries from Manama, Sitra, Hidd and other industrial areas in Bahrain. Include the delivery destination and required quantity when requesting a quotation.
Supplier in Indonesia
Industrial procurement teams and welding distributors in Indonesia can contact SMSC with their WEARtig Co 1 product specifications, order quantities and shipping requirements.
Supplier in Malaysia
Buyers in Kuala Lumpur, Selangor, Johor and other industrial areas in Malaysia can submit enquiries for product identification, availability and international supply.
Supplier in Singapore and Other Asian Markets
Enquiries are also welcome from Singapore, the Philippines, Thailand, Vietnam and other Asian markets. Confirm product requirements and delivery arrangements with SMSC.
Supplier for Europe, Africa, Australia and the Americas
SMSC welcomes international enquiries from Europe, Africa, Australia, New Zealand, North America, South America and other markets. Supply is subject to confirmation of product availability, shipping arrangements and applicable import requirements.
How to Request a Quotation
To help SMSC review your requirement for WEARtig Co 1 TIG Rods, provide:
- Complete product designation: WEARtig Co 1.
- Required rod diameter and length.
- Required quantity.
- Destination country and delivery location.
- Base-metal grade and intended application.
- Applicable specification and required certificates.
Contact SMSC through the website or by email at info@shantimetalsupply.com to discuss your requirement.
Frequently Asked Questions About WEARtig Co 1 TIG Rods
1. What are WEARtig Co 1 TIG Rods?
WEARtig Co 1 is a cobalt-alloy TIG hardfacing rod designed for wear-resistant overlays where abrasion combines with corrosion and elevated temperatures.
2. What is the AWS classification of WEARtig Co 1?
The published AWS A5.21 classification is ER CoCr-C. Verify the current manufacturer datasheet and product identification before procurement.
3. What is the EN classification?
The published EN 14700 classification is R Co3. Check the current datasheet and packaging for the product supplied.
4. What is the hardness of WEARtig Co 1?
The published hardness of the pure weld deposit is approximately 54–56 HRC. Elevated-temperature values should be checked against the original test conditions.
5. What is its typical chemical composition?
Published typical rod analysis lists 2.3% carbon, 32% chromium, 13% tungsten and cobalt as the balance. Confirm exact values and tolerances from current manufacturer documentation.
6. Which size is listed?
Published product documentation lists a 3.2 × 1000 mm size. Confirm current availability and any other sizes with SMSC.
7. Which applications are listed for this rod?
Published guidance includes industrial parts exposed to abrasion, erosion, corrosion, cavitation, pressure and elevated temperatures, including certain fittings, valve seats, cutting tools and hot-working tools.
8. What information is needed for a quotation?
Provide the complete designation, required size, quantity, destination, intended application and any applicable specification or certification requirements.
9. Does SMSC accept international enquiries?
SMSC welcomes enquiries from the UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Indonesia, Malaysia and other international markets. Availability and delivery must be confirmed for each order.
10. How should the product be handled?
Keep the rods clean, dry and protected from contamination. Follow the manufacturer's storage, handling, preheating and cooling instructions.
Contact SMSC for WEARtig Co 1 TIG Rods
Shanti Metal Supply Corporation welcomes enquiries from industrial buyers, maintenance contractors, fabricators, engineering firms and distributors. Contact SMSC to discuss WEARtig Co 1 TIG Rods, required quantities, technical documentation and worldwide supply arrangements.