Thermanit 310 Mn TIG Rods Importer, Stockist & Supplier Worldwide
Shanti Metal Supply Corporation (SMSC) is an importer, stockist, supplier and worldwide exporter of Thermanit 310 Mn TIG Rods for industrial welding, fabrication, heat-treatment equipment, steam boiler construction, crude oil processing, high-temperature engineering and maintenance requirements. SMSC supports industrial customers, contractors, fabricators, distributors and project procurement teams across the Gulf countries, Indonesia, Malaysia and other international markets.
Thermanit 310 Mn is a high-alloyed austenitic stainless steel TIG rod designed for joining and surfacing compatible heat-resistant rolled, forged and cast steels. The product is classified under AWS A5.9 / SFA-5.9 ER310 (modified) and EN ISO 14343-A W 25 20 Mn. Product selection should be verified against the base material, manufacturer documentation and qualified welding procedure.
For buyers searching for a Thermanit 310 Mn TIG Rod importer, Thermanit 310 Mn stockist, Thermanit 310 Mn supplier or Thermanit 310 Mn exporter, SMSC provides specification-based supply support for industrial and international procurement requirements.
Quick Answer: What Are Thermanit 310 Mn TIG Rods?
Thermanit 310 Mn TIG Rods are high-alloyed austenitic stainless steel filler rods designed for TIG/GTAW joining and surfacing of compatible heat-resistant rolled, forged and cast steels. They are particularly relevant to industrial equipment exposed to high-temperature gases and demanding thermal conditions. Their classifications are ER310 (modified) under AWS A5.9 and W 25 20 Mn under EN ISO 14343-A.
Thermanit 310 Mn TIG Rods – Product Overview
Thermanit 310 Mn is a high-alloy, austenitic stainless steel TIG filler metal intended for welding and surfacing compatible heat-resistant steels. Its chromium-nickel-manganese alloy system is designed for demanding high-temperature industrial environments where the selection of a suitable heat-resistant weld metal is important.
The product is used for joining similar or matching heat-resistant rolled, forged and cast steel grades. Typical industrial sectors include annealing shops, hardening facilities, steam boiler construction, the crude oil industry and ceramic manufacturing. Actual suitability depends on the material grade, operating atmosphere, temperature profile and qualified welding procedure.
Thermanit 310 Mn is a fully austenitic weld-metal type. Manufacturer information identifies applications involving oxidizing, nitrogen-containing or low-oxygen gases. The correct consumable should be selected with consideration of the working environment and the risk of high-temperature embrittlement.
Thermanit 310 Mn TIG Rods Specifications
| Property | Specification / Information |
|---|---|
| Product Name | Thermanit 310 Mn TIG Rods |
| Brand | Thermanit / BÖHLER Welding |
| Product Form | TIG Filler Rod |
| Welding Process | GTAW / TIG |
| Product Category | High-Alloy Austenitic Stainless Steel, Heat-Resistant |
| AWS Classification | AWS A5.9 / SFA-5.9 ER310 (modified) |
| EN ISO Classification | EN ISO 14343-A W 25 20 Mn |
| Material Number | 1.4842 is commonly associated with this designation; verify against the exact manufacturer product documentation |
| Weld-Metal Structure | Fully austenitic |
| Current Type | DC negative / DCEN, subject to current product guidance |
| Shielding Gas | Argon, EN ISO 14175 I1, subject to approved welding procedure |
| Primary Application | Joining and surfacing compatible heat-resistant steels |
| Business Type | Importer, Stockist, Supplier & Worldwide Exporter |
Thermanit 310 Mn Classification and Standards
Welding consumable classification is important for purchasing, traceability, welding procedure qualification and project documentation. Thermanit 310 Mn is identified by its modified ER310 classification and its EN ISO classification for high-alloy heat-resistant stainless steel TIG rods. It should not be confused with standard Thermanit 310, which has different classification details.
| Standard | Classification |
|---|---|
| AWS A5.9 / SFA-5.9 | ER310 (modified) |
| EN ISO 14343-A | W 25 20 Mn |
| Welding Process | GTAW / TIG |
| Material Family | High-alloy austenitic stainless steel |
| Application Group | Heat-resistant steel joining and surfacing |
Typical Chemical Composition of Thermanit 310 Mn TIG Rods
The following values are indicative typical analysis figures published for Thermanit 310 Mn. Actual chemistry may vary according to product specification and manufacturing batch. For final acceptance, use the current manufacturer technical data sheet and the supplied batch certificate.
| Element | Typical Content (wt. %) |
|---|---|
| Carbon (C) | 0.13 |
| Silicon (Si) | 0.90 |
| Manganese (Mn) | 3.20 |
| Chromium (Cr) | 24.60 |
| Nickel (Ni) | 20.50 |
Mechanical Properties of Thermanit 310 Mn Weld Metal
Mechanical and high-temperature performance depend on the deposited weld metal, base material, welding procedure, service environment and test conditions. Product-specific mechanical values should be obtained from the current manufacturer documentation rather than inferred from a related filler-metal grade.
| Property | Technical Consideration |
|---|---|
| Weld-Metal Type | High-alloy, fully austenitic stainless weld metal |
| Strength | Confirm current product-specific test values and applicable requirements |
| Ductility | Depends on weld-metal chemistry and test conditions |
| High-Temperature Performance | Assess against the actual temperature, atmosphere and loading conditions |
| Oxidation / Scaling Resistance | Product literature reports scaling resistance up to approximately 1150°C under specified conditions |
| Embrittlement Consideration | Manufacturer guidance advises avoiding the 650°C to 900°C range because of embrittlement risk |
Do not treat the scaling-resistance figure as a universal design service temperature. The actual operating limit depends on the atmosphere, loading, thermal cycling, component design and engineering specification.
Suitable Base Materials for Thermanit 310 Mn TIG Rods
Thermanit 310 Mn is intended for compatible heat-resistant rolled, forged and cast steels. The manufacturer identifies a range of heat-resistant chromium and chromium-nickel steel grades. Filler-metal selection should be based on the exact grade, material condition and service environment.
| Material / Application Category | Examples / Guidance |
|---|---|
| Heat-Resistant Austenitic Stainless Steels | Compatible chromium-nickel heat-resistant steel grades |
| Heat-Resistant Cast Steels | Matching or similar cast steel grades, subject to manufacturer guidance |
| Rolled and Forged Heat-Resistant Steels | Suitable grades listed in the current Thermanit 310 Mn product documentation |
| Annealing and Hardening Equipment | Compatible heat-resistant furnace components |
| Boiler and Thermal Equipment | Specified heat-resistant steel components after welding-procedure review |
| Industrial Process Equipment | Equipment exposed to suitable high-temperature gases and operating conditions |
Welding Parameters for Thermanit 310 Mn TIG Rods
Thermanit 310 Mn TIG rods are used with the gas tungsten arc welding process. Welding conditions should be selected according to rod diameter, joint preparation, base-metal thickness, welding position, heat input and the approved welding procedure.
| Parameter | Reference / Guidance |
|---|---|
| Welding Process | GTAW / TIG |
| Shielding Gas | Argon / EN ISO 14175 I1, subject to manufacturer guidance |
| Polarity | DC negative / DCEN, confirm against the current product data sheet |
| Current and Amperage | Determine from rod diameter, joint configuration and qualified WPS |
| Voltage and Travel Speed | Determine from the welding procedure and required heat input |
| Preheat / Interpass Temperature | Determine from base material, component design, applicable code and WPS |
| Post-Weld Heat Treatment | Follow the material specification and qualified welding procedure |
High-Temperature Service and Operating Considerations
Thermanit 310 Mn is intended for suitable heat-resistant steel applications. Product literature reports resistance to scaling up to approximately 1150°C under specified conditions. This figure describes a reported scaling-resistance limit and must not automatically be treated as the maximum allowable continuous operating temperature of a component.
The manufacturer also advises avoiding the temperature range of 650°C to 900°C because of the risk of embrittlement. This consideration is important when evaluating operating cycles, prolonged exposure, thermal transients and the expected mechanical requirements of a welded component.
For equipment exposed to sulfur-bearing, oxidizing, nitrogen-containing or low-oxygen atmospheres, the atmosphere and application details should be reviewed before finalizing the filler metal. Manufacturer guidance specifies particular considerations for cap passes in sulfurous atmospheres.
Applications of Thermanit 310 Mn TIG Rods
Thermanit 310 Mn TIG rods are used for suitable heat-resistant steel joining and surfacing operations across industrial and process sectors. Application suitability must be confirmed for the actual operating temperature, atmosphere and base material.
- Annealing shop equipment and heat-treatment facilities
- Hardening shop and furnace equipment
- Steam boiler construction and associated heat-resistant components
- Crude oil industry equipment and compatible process components
- Ceramic industry furnaces and thermal processing equipment
- Joining compatible heat-resistant rolled steel grades
- Joining compatible forged heat-resistant steel grades
- Welding compatible heat-resistant cast steel grades
- Surfacing of suitable heat-resistant components
- Industrial equipment exposed to oxidizing gases
- Selected equipment exposed to nitrogen-containing gases
- High-temperature industrial fabrication and maintenance
Advantages of Thermanit 310 Mn TIG Rods
- High-alloy austenitic stainless steel filler-metal classification.
- Designed for compatible heat-resistant steel joining and surfacing.
- Modified ER310 classification for the specified product type.
- EN ISO classification W 25 20 Mn.
- Fully austenitic weld-metal type.
- Suitable for specified high-temperature industrial welding applications.
- Applicable to compatible rolled, forged and cast heat-resistant steels.
- Suitable for TIG/GTAW welding when used in accordance with product guidance.
- Used in furnace, boiler, crude oil and ceramic industry applications.
- Product identification and technical documentation support for procurement enquiries.
Available Sizes of Thermanit 310 Mn TIG Rods
Thermanit 310 Mn TIG rods are listed in commonly used diameters and lengths, subject to the manufacturer's product range and distributor availability. Confirm the exact size, package and stock status when requesting a quotation.
| Diameter | Commonly Listed Length | Product Form |
|---|---|---|
| 1.6 mm | 1000 mm | TIG Filler Rod |
| 2.0 mm | 1000 mm | TIG Filler Rod |
| 2.4 mm | 1000 mm | TIG Filler Rod |
| 3.2 mm | 1000 mm | TIG Filler Rod |
Storage and Handling of Thermanit 310 Mn TIG Rods
Correct storage and handling help keep TIG filler rods clean and suitable for use. Rods should be protected from moisture, dust, oil, grease and other contamination that could affect weld quality.
- Store rods in a clean, dry and suitable environment.
- Protect filler rods from moisture and surface contamination.
- Keep product labels and batch identification legible.
- Separate different filler-metal grades and classifications.
- Verify the designation before use in production welding.
- Follow the manufacturer's packaging and handling recommendations.
- Maintain traceability where required by the project or quality plan.
Thermanit 310 Mn TIG Rods Exporter Worldwide
Shanti Metal Supply Corporation (SMSC) supports international industrial enquiries for Thermanit 310 Mn TIG rods. The company works with industrial buyers, engineering contractors, fabrication companies, maintenance teams, distributors and project procurement departments seeking welding consumables for demanding applications.
The Gulf countries are a primary international market for SMSC. The company also supports enquiries from Indonesia, Malaysia and other international markets, subject to product availability, commercial terms, destination and applicable export requirements.
Buyers can provide the exact product designation, required rod diameter, quantity, destination and any documentation requirements to help identify the requested product and review supply options.
Thermanit 310 Mn TIG Rods Supplier for Countries
SMSC has a particular supply focus on the countries, supporting industrial welding and fabrication requirements for power-generation, oil and gas, petrochemical, pressure-equipment, piping, engineering and maintenance projects.
- Thermanit 310 Mn TIG Rods Supplier in UAE
- Thermanit 310 Mn TIG Rods Supplier in Dubai
- Thermanit 310 Mn TIG Rods Supplier in Abu Dhabi
- Thermanit 310 Mn TIG Rods Supplier in Saudi Arabia
- Thermanit 310 Mn TIG Rods Supplier in Qatar
- Thermanit 310 Mn TIG Rods Supplier in Oman
- Thermanit 310 Mn TIG Rods Supplier in Kuwait
- Thermanit 310 Mn TIG Rods Supplier in Bahrain
- Thermanit 310 Mn TIG Rods Supplier in Singapore
- Thermanit 310 Mn TIG Rods Supplier in Malaysia
- Thermanit 310 Mn TIG Rods Supplier in Indonesia
- Thermanit 310 Mn TIG Rods Supplier in Thailand
- Thermanit 310 Mn TIG Rods Supplier in Vietnam
- Thermanit 310 Mn TIG Rods Supplier in Philippines
- Thermanit 310 Mn TIG Rods Supplier in Bangladesh
- Thermanit 310 Mn TIG Rods Supplier in Sri Lanka
- Thermanit 310 Mn TIG Rods Supplier in Japan
- Thermanit 310 Mn TIG Rods Supplier in South Korea
- Thermanit 310 Mn TIG Rods Supplier in Taiwan
- Thermanit 310 Mn TIG Rods Supplier in Australia
- Thermanit 310 Mn TIG Rods Supplier in New Zealand
- Thermanit 310 Mn TIG Rods Supplier in South Africa
- Thermanit 310 Mn TIG Rods Supplier in Nigeria
- Thermanit 310 Mn TIG Rods Supplier in Kenya
- Thermanit 310 Mn TIG Rods Supplier in Ghana
- Thermanit 310 Mn TIG Rods Supplier in Tanzania
- Thermanit 310 Mn TIG Rods Supplier in Morocco
- Thermanit 310 Mn TIG Rods Supplier in Algeria
Thermanit 310 Mn TIG Rods Supplier in Indonesia and Malaysia
SMSC also supports industrial enquiries from Indonesia and Malaysia. Fabricators, engineering contractors, industrial maintenance companies, distributors and project procurement teams can provide their requirements for review, subject to availability and applicable supply conditions.
Worldwide Supply Support for Thermanit 310 Mn TIG Rods
In addition to its Gulf market focus, SMSC welcomes enquiries from industrial customers across Asia-Pacific, Europe, Africa, the Americas and other international regions. Export feasibility depends on product availability, destination, shipment arrangements and applicable regulations.
Why Choose Shanti Metal Supply Corporation (SMSC)?
- Importer, stockist and supplier of industrial welding consumables.
- Worldwide enquiry support for industrial product requirements.
- Primary international supply focus on Gulf countries.
- Support for enquiries from Indonesia and Malaysia.
- Product designation and classification-based enquiry handling.
- Support for bulk and project procurement requirements.
- Assistance with requested product sizes and documentation details.
- Supply enquiries for fabrication, engineering and maintenance applications.
- Product identification support to help buyers specify the correct grade.
How to Order Thermanit 310 Mn TIG Rods
To request availability, pricing or a quotation from Shanti Metal Supply Corporation (SMSC), provide the following details so the product can be identified correctly.
- Product Name: Thermanit 310 Mn TIG Rods.
- Classification: ER310 (modified) / W 25 20 Mn.
- Required Diameter: Specify the required rod diameter.
- Required Quantity: Number of packs or total quantity.
- Destination Country: UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Indonesia, Malaysia or another destination.
- Application: Provide the base-metal grade and intended welding application where available.
- Documentation: Specify any technical data sheets, material certificates or project documents required.
Need Thermanit 310 Mn TIG Rods?
Contact Shanti Metal Supply Corporation (SMSC) for product availability, stock enquiries, quotations and worldwide supply requirements for Thermanit 310 Mn TIG Rods.
Frequently Asked Questions About Thermanit 310 Mn TIG Rods
What are Thermanit 310 Mn TIG Rods?
Thermanit 310 Mn is a high-alloy austenitic stainless steel TIG rod designed for joining and surfacing compatible heat-resistant rolled, forged and cast steels.
What is the AWS classification of Thermanit 310 Mn?
The product is classified under AWS A5.9 / SFA-5.9 as ER310 (modified).
What is the EN ISO classification of Thermanit 310 Mn?
Its EN ISO 14343-A classification is W 25 20 Mn.
What is the difference between Thermanit 310 and Thermanit 310 Mn?
Standard Thermanit 310 is classified as ER310 under AWS and G 25 20 under EN ISO 14343-A. Thermanit 310 Mn is the modified product classified as ER310 (modified) and W 25 20 Mn. Always verify the exact product designation before purchasing.
What is Thermanit 310 Mn used for?
It is used for compatible heat-resistant steel joining and surfacing in applications such as annealing shops, hardening facilities, steam boiler construction, the crude oil industry and ceramic manufacturing.
What is the typical chemical composition of Thermanit 310 Mn?
Published typical reference values are approximately 0.13% carbon, 0.90% silicon, 3.20% manganese, 24.60% chromium and 20.50% nickel. Actual values should be checked against the current product data sheet and batch certificate.
Which welding process is used with Thermanit 310 Mn?
Thermanit 310 Mn TIG rods are used for gas tungsten arc welding, also known as GTAW or TIG welding.
What shielding gas is used for Thermanit 310 Mn TIG welding?
Argon is commonly specified for applicable TIG welding, with I1 identified under EN ISO 14175. Follow the current manufacturer guidance and the approved welding procedure for the exact application.
What is the temperature resistance of Thermanit 310 Mn?
Manufacturer and distributor product information reports scaling resistance up to approximately 1150°C under specified conditions. This is not a universal maximum service-temperature rating; operating suitability depends on the atmosphere, loading and engineering design.
Is there a temperature range that should be avoided?
Manufacturer guidance advises avoiding the 650°C to 900°C range because of the risk of embrittlement. Review the current technical documentation for the specific application.
What sizes of Thermanit 310 Mn TIG Rods are available?
Commonly listed sizes include 1.6 mm, 2.0 mm, 2.4 mm and 3.2 mm in 1000 mm lengths. Confirm current availability, packaging and dimensions when requesting a quotation.
Who supplies Thermanit 310 Mn TIG Rods for Gulf countries?
Shanti Metal Supply Corporation (SMSC) supports industrial enquiries for Thermanit 310 Mn TIG Rods, with a primary international supply focus on Gulf countries.
Does SMSC support enquiries from Indonesia and Malaysia?
Yes. SMSC supports international industrial enquiries from Indonesia and Malaysia, subject to product availability and applicable supply requirements.
Does SMSC support worldwide supply enquiries?
SMSC welcomes worldwide industrial supply enquiries, subject to product availability, destination, commercial terms and applicable export requirements.
What information should I provide when requesting a quotation?
Provide the exact product name, classification, required diameter, quantity, destination, application and any required technical documentation or certificates.
Our Other Products
Explore other industrial welding consumables available through our product range. Please confirm product specifications and availability for your requirement.
Conclusion
Thermanit 310 Mn TIG Rods are high-alloy austenitic stainless steel welding consumables designed for suitable heat-resistant rolled, forged and cast steel applications. The product is classified as ER310 (modified) under AWS A5.9 / SFA-5.9 and W 25 20 Mn under EN ISO 14343-A.
Shanti Metal Supply Corporation (SMSC) supports industrial procurement enquiries as an importer, stockist, supplier and worldwide exporter of welding consumables. The Gulf countries are a primary international market, with additional enquiries supported from Indonesia, Malaysia and other destinations.
Contact SMSC with the required diameter, quantity, destination and application details to enquire about Thermanit 310 Mn TIG Rod availability and supply options.