Thermanit 17/15 TT TIG Rods Importer, Stockist & Supplier Worldwide
Shanti Metal Supply Corporation (SMSC) welcomes enquiries for Thermanit 17/15 TT TIG Rods, a high-alloyed austenitic stainless-steel filler material designed for specified cryogenic welding applications. The manufacturer identifies the product with EN ISO 14343-A classification W Z 17 15 Mn W and lists it under AWS A5.9 as EG.
Buyers searching for a Thermanit 17/15 TT TIG Rods importer, stockist, supplier or exporter can contact SMSC to discuss product identification, sizes, quantities, technical documentation and delivery requirements. Enquiries are welcome from India, the Middle East, Indonesia, Malaysia and other international markets.
Confirm the current manufacturer datasheet, exact base-metal grade, welding procedure and project requirements before selecting the filler rod for critical cryogenic service.
Quick Answer: What Are Thermanit 17/15 TT TIG Rods?
Thermanit 17/15 TT TIG Rods are high-alloyed austenitic stainless-steel welding filler rods intended for specified cryogenic applications. The manufacturer lists EN ISO 14343-A W Z 17 15 Mn W and AWS A5.9 EG. The product is documented for joining certain cryogenic austenitic CrNi(N) steels, cast-steel grades and suitable quenched and tempered 9% nickel steels.
The manufacturer reports good toughness at subzero temperatures as low as -196°C. Actual suitability depends on the exact base material, welding procedure, test requirements and project specification.
Thermanit 17/15 TT – Product Overview
Thermanit 17/15 TT is a specialised, high-alloyed austenitic stainless-steel TIG filler material. Its high manganese, chromium, nickel and tungsten content is characteristic of the product's alloy design. It is intended for specific joining applications where low-temperature weld-metal toughness is required.
Manufacturer documentation identifies cryogenic austenitic CrNi(N) steels and cast-steel grades among its application areas. It also identifies selected cryogenic nickel steels suitable for quenching and tempering. These materials must be matched to the relevant filler-metal recommendation and qualified welding procedure.
SMSC welcomes enquiries from fabricators, engineering companies, welding contractors, distributors and industrial procurement teams seeking Thermanit 17/15 TT TIG Rods. Share the exact designation, required diameter, quantity, destination and technical requirements when requesting availability information.
Thermanit 17/15 TT – Technical Specifications
| Property | Specification / Details |
|---|---|
| Product Name | Thermanit 17/15 TT TIG Rods |
| Product Category | High-alloyed austenitic stainless-steel TIG rods |
| AWS Classification | AWS A5.9, EG |
| EN ISO Classification | EN ISO 14343-A, W Z 17 15 Mn W |
| Welding Process | TIG / GTAW |
| Material Structure | Austenitic, according to product documentation |
| Low-Temperature Performance | Manufacturer documentation identifies toughness down to -196°C |
| Typical Base Materials | 1.5662 X8Ni9 and 1.4311 X2CrNiN18-10, subject to the manufacturer's guidance |
| Typical Analysis | See the reference composition table below; confirm current datasheet values |
| Available Diameters | Confirm current TIG rod sizes and availability with SMSC |
| Packaging | Confirm product-specific packaging and item number when ordering |
| Supplier | Shanti Metal Supply Corporation (SMSC) |
Classification and Standards
Product classification is important when selecting welding consumables for engineered assemblies. Thermanit 17/15 TT is identified by its EN ISO 14343-A designation and the manufacturer's AWS listing. Procurement teams should check the classification against the actual packaging and current technical documentation before placing an order.
| Standard / Item | Classification / Details |
|---|---|
| AWS Standard Listing | AWS A5.9 |
| AWS Classification | EG |
| EN ISO Standard | EN ISO 14343-A |
| EN ISO Classification | W Z 17 15 Mn W |
| Product Type | High-alloyed austenitic stainless-steel TIG rod |
| Verification | Confirm current manufacturer datasheet and project specification |
Thermanit 17/15 TT – Typical Chemical Composition
The manufacturer publishes the following typical analysis for the product. These values are reference figures rather than guaranteed batch results. For acceptance, traceability or compliance purposes, refer to the current manufacturer documentation and any required batch-specific certificate.
| Element | Typical Analysis (wt.-%) |
|---|---|
| Carbon (C) | 0.20 |
| Silicon (Si) | 0.40 |
| Manganese (Mn) | 10.5 |
| Chromium (Cr) | 17.5 |
| Nickel (Ni) | 14.0 |
| Tungsten (W) | 3.5 |
Thermanit 17/15 TT – Mechanical Properties
Weld-metal mechanical properties depend on the test condition, shielding gas, welding procedure and applicable standard. For this reason, the values required for an order or project should be checked against the current TIG rod datasheet.
| Property | Technical Guidance |
|---|---|
| Yield Strength | Refer to current manufacturer TIG rod documentation and stated test condition |
| Tensile Strength | Verify the applicable value and acceptance requirements from the current datasheet |
| Elongation | Confirm the test condition and applicable published value |
| Impact Properties at Room Temperature | Refer to the manufacturer's product-specific test data |
| Impact Properties at -196°C | Confirm the applicable test results and project acceptance criteria |
| Weld-Metal Structure | Austenitic, according to product documentation |
Applications of Thermanit 17/15 TT
Thermanit 17/15 TT is intended for specified welding applications where austenitic weld-metal properties and low-temperature toughness are required. Application suitability must be confirmed by the welding engineer against the base-metal grade and qualified procedure.
- Cryogenic stainless-steel fabrication: Selected austenitic CrNi(N) steels where the filler-metal recommendation is confirmed.
- Cryogenic cast-steel welding: Specified cast-steel grades included in the manufacturer's application guidance.
- 9% nickel steel fabrication: Suitable quenched and tempered nickel steels, subject to the approved welding procedure.
- Low-temperature engineering: Welded assemblies for which the project specifies verified impact performance at subzero temperatures.
- Industrial fabrication: Selected stainless-steel joining applications that match the manufacturer's guidance.
- Specialised welding projects: Projects requiring a specific filler-metal classification and documented low-temperature properties.
The application examples above are not a universal approval for every material or design. Confirm the exact base-metal designation, service temperature, design code and testing requirements before selecting the consumable.
Base Materials and Compatibility
The manufacturer's documentation identifies the following base-material references for Thermanit 17/15 TT. The final choice of filler metal should be confirmed against the complete base-metal specification and qualified welding procedure.
| Material Number | Material Designation |
|---|---|
| 1.5662 | X8Ni9 – 9% nickel steel |
| 1.4311 | X2CrNiN18-10 – austenitic stainless steel |
Welding Parameters and Operating Guidance
Thermanit 17/15 TT TIG Rods should be used according to the manufacturer's instructions and an approved welding procedure. The precise parameters must be selected for the base material, joint design, thickness, welding position and project code.
| Parameter | Guidance |
|---|---|
| Welding Process | TIG / GTAW |
| Current and Polarity | Follow the current product datasheet and approved WPS |
| Shielding Gas | Use the gas specified for the TIG rod in the manufacturer's documentation |
| Joint Preparation | Follow the approved fabrication and welding procedure |
| Surface Cleanliness | Remove contaminants before welding |
| Preheating | Determine according to the base material and approved procedure |
| Heat Input | Follow the qualified welding procedure and project requirements |
| Inspection and Testing | Perform the examinations required by the applicable code and specification |
Quality, Traceability and Documentation
Correct identification and traceability are important when procuring welding consumables for critical low-temperature service. Buyers should communicate the applicable documentation requirements when requesting a quotation.
- Confirm the complete Thermanit 17/15 TT product designation.
- Verify the AWS and EN ISO classification on the product documentation.
- Confirm the required diameter and product form.
- State whether a manufacturer datasheet, certificate or batch-specific documentation is required.
- Verify the applicable welding procedure and inspection requirements.
- Confirm quantity, packaging and delivery destination.
Storage and Handling of TIG Rods
Correct handling helps protect welding filler rods from contamination and physical damage. Follow the manufacturer's storage instructions and any additional site-specific consumable-control procedures.
- Keep rods in their original packaging until needed.
- Store consumables in a clean and dry environment.
- Protect rods from oil, grease, dust and moisture.
- Check the product designation and batch identification before use.
- Keep different filler-metal grades separated and clearly labelled.
- Follow the project requirements for consumable traceability.
Why Contact Shanti Metal Supply Corporation?
Shanti Metal Supply Corporation (SMSC) welcomes enquiries from industrial buyers seeking welding consumables for fabrication and engineering projects. Contact SMSC about Thermanit 17/15 TT TIG Rods to discuss product identification, sizes, quantities, documentation and delivery requirements.
- Enquiries for Thermanit 17/15 TT TIG Rods.
- Assistance identifying the requested product classification.
- Quotation enquiries based on rod size and quantity.
- Discussion of datasheets and project documentation requirements.
- Enquiries from industrial fabricators, contractors and distributors.
- International supply enquiries from Gulf countries, Indonesia, Malaysia and other markets.
Thermanit 17/15 TT Supplier for Worldwide Markets
SMSC welcomes product enquiries from industrial procurement teams, welding contractors, fabrication companies and distributors seeking Thermanit 17/15 TT TIG Rods. Share your required product designation, diameter, quantity, technical requirements and destination so the enquiry can be reviewed.
Thermanit 17/15 TT Supplier in the UAE
Buyers searching for a Thermanit 17/15 TT TIG Rods supplier in the United Arab Emirates, including Dubai, Abu Dhabi, Sharjah and Ajman, can contact SMSC with their requirements. Provide the required rod diameter, quantity and destination for an availability enquiry.
Thermanit 17/15 TT Supplier in Saudi Arabia
SMSC welcomes enquiries from customers looking for Thermanit 17/15 TT TIG Rods in Saudi Arabia, including Riyadh, Jeddah, Dammam and Jubail. Share the required product designation, technical specification and delivery details.
Thermanit 17/15 TT TIG Rods Supplier in Qatar
Industrial buyers searching for Thermanit 17/15 TT TIG Rods in Qatar, including Doha and other project locations, can contact SMSC to discuss their welding consumable requirements. Availability and delivery arrangements must be confirmed.
Thermanit 17/15 TT TIG Rods Supplier in Oman
SMSC welcomes enquiries for Thermanit 17/15 TT TIG Rods from Oman, including Muscat, Sohar and Salalah. Include the required size, quantity, destination and any technical documentation requirements in your enquiry.
Thermanit 17/15 TT TIG Rods Supplier in Kuwait
Buyers looking for Thermanit 17/15 TT TIG Rods in Kuwait can contact SMSC with their product requirements. Confirm the required rod size, quantity and delivery arrangements with the sales team.
Thermanit 17/15 TT TIG Rods Supplier in Bahrain
SMSC welcomes enquiries for Thermanit 17/15 TT TIG Rods in Bahrain, including Manama, Hidd and Sitra. Provide the product designation, required quantity and destination when requesting a quotation.
Thermanit 17/15 TT TIG Rods Supplier in Indonesia
Industrial buyers and distributors searching for Thermanit 17/15 TT TIG Rods in Indonesia can contact SMSC with their technical and purchasing requirements. Supply feasibility and shipping arrangements are confirmed individually.
Thermanit 17/15 TT TIG Rods Supplier in Malaysia
SMSC welcomes enquiries from buyers seeking Thermanit 17/15 TT TIG Rods in Malaysia, including Kuala Lumpur, Selangor, Johor and Penang. Include the required size, quantity and destination in your enquiry.
Thermanit 17/15 TT TIG Rods for Singapore and Other Asian Markets
Buyers in Singapore, Thailand, Vietnam and the Philippines can submit enquiries for Thermanit 17/15 TT TIG Rods. Product availability, documentation and shipping details must be confirmed for the intended destination.
Thermanit 17/15 TT TIG Rods for Bangladesh and Sri Lanka
Procurement teams in Bangladesh and Sri Lanka can contact SMSC with their welding consumable requirements. Share the requested product designation, quantity, destination and technical specifications for review.
Thermanit 17/15 TT TIG Rods for Australia, New Zealand and Africa
SMSC welcomes international enquiries from Australia, New Zealand, South Africa and other markets. Contact the sales team to discuss product requirements and possible supply arrangements.
How to Request a Quotation
To help the SMSC team review your Thermanit 17/15 TT TIG Rods enquiry, provide the following information:
- Complete product designation.
- Required rod diameter and quantity.
- Base-metal grade and application, where available.
- Applicable material specification and welding standard.
- Destination country and delivery location.
- Required technical datasheet, certificate or inspection documents.
- Requested delivery schedule and other purchasing requirements.
Frequently Asked Questions About Thermanit 17/15 TT TIG Rods
1. What are Thermanit 17/15 TT TIG Rods?
Thermanit 17/15 TT is a high-alloyed austenitic stainless-steel TIG filler material intended for specified cryogenic welding applications.
2. What is the EN ISO classification of Thermanit 17/15 TT?
The manufacturer lists EN ISO 14343-A classification W Z 17 15 Mn W. Confirm the designation against the current product documentation before ordering.
3. What is the AWS classification?
The manufacturer lists AWS A5.9 classification EG. Check the current manufacturer datasheet for the exact product form and applicable classification details.
4. Are Thermanit 17/15 TT TIG Rods suitable for cryogenic welding?
Manufacturer documentation identifies applications involving specified cryogenic stainless steels and suitable nickel steels, with toughness at temperatures down to -196°C. Confirm project requirements and the approved welding procedure before use.
5. Which base materials are listed for this product?
The referenced manufacturer documentation lists 1.5662 X8Ni9 and 1.4311 X2CrNiN18-10. Confirm exact compatibility for the material combination and project.
6. What is the typical chemical composition?
Published typical analysis lists carbon 0.20%, silicon 0.40%, manganese 10.5%, chromium 17.5%, nickel 14.0% and tungsten 3.5%. Verify current manufacturer documentation for acceptance requirements.
7. Which rod diameters are available?
Confirm the current TIG rod diameter options and availability with SMSC. Include the required diameter and quantity when submitting an enquiry.
8. Who supplies Thermanit 17/15 TT TIG Rods?
Shanti Metal Supply Corporation (SMSC) welcomes enquiries for Thermanit 17/15 TT TIG Rods. Contact SMSC to discuss availability, quantities, product documentation and delivery requirements.
9. Can I enquire about supply to the UAE, Saudi Arabia and Qatar?
SMSC welcomes enquiries from the UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain and other international markets, subject to product availability and destination requirements.
10. Does SMSC accept enquiries from Indonesia and Malaysia?
Yes. Buyers and distributors in Indonesia and Malaysia can submit enquiries with the required product designation, quantity, technical specification and delivery destination.
11. Can I request technical documents?
Include your documentation requirements when requesting a quotation. Availability of datasheets, certificates and batch-specific documents must be confirmed for the exact product and order.
12. What details are needed for a quotation?
Provide the complete product designation, rod diameter, quantity, destination country, applicable specification and any certificate or inspection requirements.
Our Other Products
Explore welding consumables for industrial, fabrication and engineering requirements.
Conclusion
Thermanit 17/15 TT TIG Rods are high-alloyed austenitic stainless-steel filler rods identified by EN ISO 14343-A W Z 17 15 Mn W and listed under AWS A5.9 as EG. Manufacturer documentation identifies them for specified cryogenic welding applications requiring low-temperature toughness. Confirm the current datasheet, base-metal compatibility and qualified welding procedure before use.
Shanti Metal Supply Corporation (SMSC) welcomes enquiries from industrial customers, fabricators, contractors, distributors and procurement teams in India, the Middle East, Indonesia, Malaysia and other international markets. Provide the required diameter, quantity, destination and technical requirements when requesting a quotation.