BOHLER DCMS-IG TIG Rods Importer, Stockist & Supplier Worldwide
Shanti Metal Supply Corporation (SMSC) is an importer, stockist, supplier and worldwide exporter of BOHLER DCMS-IG TIG Rods for industrial welding, fabrication, pressure equipment, piping, power generation, engineering and maintenance requirements. SMSC supports industrial customers, contractors, fabricators, distributors and project procurement teams across the Gulf countries, Indonesia, Malaysia and other international markets.
BOHLER DCMS-IG is a low-alloyed, creep-resistant TIG rod designed for GTAW applications involving compatible Cr-Mo alloy steels. According to the manufacturer, BOHLER DCMS-IG is classified under AWS A5.28 as ER80S-G TIG Rods and ER80S-B2 (modified) and under EN ISO 21952-A as W CrMo1Si TIG Rods.
The product is intended particularly for welding 1.25% Cr / 0.5% Mo alloyed boiler, plate and tube steels and is preferably used for steels such as 13CrMo4-5 and ASTM A335 P11 / P12.
For buyers searching for a BOHLER DCMS-IG TIG Rod importer, BOHLER DCMS-IG stockist, BOHLER DCMS-IG supplier or BOHLER DCMS-IG exporter, SMSC provides specification-based supply support for domestic and international industrial requirements.
Quick Answer: What Are BOHLER DCMS-IG TIG Rods?
BOHLER DCMS-IG TIG Rods are low-alloyed, creep-resistant welding rods for GTAW/TIG welding of suitable chromium-molybdenum alloy steels. The manufacturer classifies the product under AWS A5.28 as ER80S-G and ER80S-B2 (modified) and under EN ISO 21952-A as W CrMo1Si TIG Rods. The rod is particularly associated with welding 1.25% Cr / 0.5% Mo boiler, plate and tube steels, including suitable 13CrMo4-5 and ASTM A335 P11/P12 materials.
BOHLER DCMS-IG TIG Rods – Product Overview
BOHLER DCMS-IG is a low-alloyed, creep-resistant TIG rod developed for GTAW welding applications involving compatible heat-resistant Cr-Mo steels. The deposited weld metal is described by the manufacturer as having good mechanical properties and good toughness.
The product is intended for welding applications where the filler metal needs to be compatible with creep-resistant steels and similar alloyed cast steels. It can also be used for suitable case-hardening and nitriding steels and similar alloyed heat-treatable steels within the manufacturer's stated application range.
BOHLER DCMS-IG is particularly associated with 13CrMo4-5 and ASTM A335 P11 / P12 TIG Rods materials. The manufacturer also states that the product is approved for long-term service up to approximately 570°C, subject to the applicable engineering, material and welding requirements.
The product is also identified as suitable for step-cooling applications. Manufacturer information states that the deposit provides good resistance to cracking in caustic soda and that creep rupture strength values are within the scatter band of the 13CrMo4-5 base material.
BOHLER DCMS-IG TIG Rods Specifications
| Property | Specification / Information |
|---|---|
| Product Name | BOHLER DCMS-IG |
| Brand | BOHLER |
| Product Form | TIG Rod |
| Welding Process | GTAW / TIG |
| Product Category | Low-Alloyed, Creep-Resistant Welding Consumable |
| AWS Classification | AWS A5.28 ER80S-G / ER80S-B2 (modified) |
| EN ISO Classification | EN ISO 21952-A W CrMo1Si |
| Alloy System | Chromium-Molybdenum Low-Alloy Steel |
| Typical Base Material Group | 1.25% Cr / 0.5% Mo alloyed boiler, plate and tube steels |
| Preferred Steels | 13CrMo4-5 and ASTM A335 P11 / P12 |
| Service Application | Creep-resistant and elevated-temperature applications |
| Long-Term Service | Approved for long-term service up to approximately 570°C, subject to applicable requirements |
| Step-Cooling | Suitable for step-cooling applications |
BOHLER DCMS-IG TIG Rods AWS & EN ISO Classification
BOHLER DCMS-IG belongs to the low-alloyed, creep-resistant TIG rod range of BOHLER Welding. The manufacturer's TIG rod listing identifies the product with AWS A5.28 ER80S-G / ER80S-B2 (modified) and EN ISO 21952-A W CrMo1Si.
| Standard | Classification |
|---|---|
| AWS | A5.28 – ER80S-G / ER80S-B2 (modified) |
| EN ISO | 21952-A – W CrMo1Si |
| Welding Process | GTAW / TIG |
| Material Category | Low-Alloyed Creep-Resistant Steel |
BOHLER DCMS-IG TIG Rods Applications
BOHLER DCMS-IG is designed for welding compatible chromium-molybdenum steels used in applications where elevated temperature and creep resistance are important considerations.
- Welding of 1.25% Cr / 0.5% Mo boiler steels
- Welding of suitable Cr-Mo plate steels
- Welding of compatible Cr-Mo tube steels
- 13CrMo4-5 steel welding applications
- ASTM A335 P11 / P12 related welding applications
- Pressure equipment and piping applications
- Power generation and boiler-related fabrication
- Creep-resistant steel fabrication and maintenance
- Suitable case-hardening and nitriding steel applications
- Selected alloyed heat-treatable steel welding applications
Base Materials for BOHLER DCMS-IG TIG Rods
The manufacturer identifies BOHLER DCMS-IG for 1.25% Cr / 0.5% Mo alloyed boiler, plate and tube steels. The product is preferably used for 13CrMo4-5 and ASTM A335 P11 / P12 steels.
The manufacturer's published information also identifies compatible creep-resistant steels, similar alloyed cast steels, case-hardening and nitriding steels, and similar alloyed heat-treatable steels with tensile strength up to 780 MPa within the stated application range.
Industries Using BOHLER DCMS-IG TIG Rods
- Power Generation
- Boiler Manufacturing
- Pressure Equipment Manufacturing
- Industrial Piping
- Process Plant Fabrication
- Engineering and Fabrication
- Maintenance and Repair
- Heat-Resistant Steel Fabrication
Key Characteristics of BOHLER DCMS-IG TIG Rods
- Low-alloyed, creep-resistant TIG welding consumable
- Cr-Mo alloy system for compatible heat-resistant steels
- AWS A5.28 ER80S-G / ER80S-B2 (modified) classification
- EN ISO 21952-A W CrMo1Si classification
- Suitable for 1.25% Cr / 0.5% Mo boiler, plate and tube steels
- Preferred for 13CrMo4-5 and ASTM A335 P11 / P12
- Suitable for selected step-cooling applications
- Good toughness and mechanical properties according to manufacturer information
- Suitable for selected elevated-temperature service applications
BOHLER DCMS-IG TIG Rods for Elevated-Temperature Service
BOHLER DCMS-IG is a creep-resistant TIG rod intended for compatible Cr-Mo steels used in elevated-temperature applications. The manufacturer states that the product is approved for long-term service up to approximately 570°C.
Actual allowable service temperature and welding procedure should not be determined from the filler-metal designation alone. The complete material specification, joint design, heat treatment, welding procedure and applicable engineering code should be considered for the final application.
BOHLER DCMS-IG TIG Rods Importer & Stockist – SMSC
Shanti Metal Supply Corporation (SMSC) supplies BOHLER DCMS-IG TIG Rods for industrial and engineering requirements. As an importer and stockist, SMSC supports enquiries from customers requiring specification-based welding consumables.
SMSC focuses on supply requirements across the Gulf countries, including UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain, as well as Indonesia and Malaysia and other international markets.
Customers can contact SMSC for BOHLER DCMS-IG enquiries based on required product specification, quantity, application and destination.
BOHLER DCMS-IG TIG Rod Supplier for Gulf Countries
SMSC supports industrial enquiries for BOHLER DCMS-IG TIG Rods from customers and procurement teams across the Gulf region.
- BOHLER DCMS-IG TIG Rod Supplier UAE
- BOHLER DCMS-IG TIG Rod Supplier Saudi Arabia
- BOHLER DCMS-IG TIG Rod Supplier Qatar
- BOHLER DCMS-IG TIG Rod Supplier Oman
- BOHLER DCMS-IG TIG Rod Supplier Kuwait
- BOHLER DCMS-IG TIG Rod Supplier Bahrain
BOHLER DCMS-IG TIG Rod Supplier for Indonesia & Malaysia
SMSC also supports international industrial enquiries from Indonesia and Malaysia for BOHLER DCMS-IG TIG Rods, subject to product availability, quantity, specifications and applicable supply requirements.
Why Choose SMSC for BOHLER DCMS-IG TIG Rods?
- Importer and Stockist
- Industrial Welding Consumable Supply
- Specification-Based Product Support
- Supply Support for Gulf Countries
- International Market Support
- Support for Indonesia and Malaysia
- Product Identification According to Required Classification
- Support for Industrial and Project Procurement
- Bulk Requirement Enquiries
- Worldwide Export Supply Support
How to Order BOHLER DCMS-IG TIG Rods
When enquiring for BOHLER DCMS-IG TIG Rods, customers should provide the required product name, classification, rod diameter, quantity, application and delivery destination wherever available.
- Confirm the required BOHLER DCMS-IG product.
- Confirm the required AWS or EN ISO classification.
- Specify required rod diameter and quantity.
- Provide the application or base-material information when relevant.
- Provide the delivery destination.
- Request availability and commercial quotation from SMSC.
Our Other Products
Explore our range of high-quality products designed for industrial and engineering applications.
Frequently Asked Questions – BOHLER DCMS-IG TIG Rods
What is BOHLER DCMS-IG?
BOHLER DCMS-IG is a low-alloyed, creep-resistant TIG rod designed for GTAW applications involving compatible Cr-Mo alloy steels.
What is the AWS classification of BOHLER DCMS-IG?
BOHLER DCMS-IG is listed under AWS A5.28 as ER80S-G and ER80S-B2 (modified).
What is the EN ISO classification of BOHLER DCMS-IG?
The EN ISO classification is EN ISO 21952-A, W CrMo1Si.
What welding process is used with BOHLER DCMS-IG?
BOHLER DCMS-IG is a TIG rod used for gas tungsten arc welding (GTAW/TIG).
Which steels are commonly associated with BOHLER DCMS-IG?
The manufacturer identifies BOHLER DCMS-IG particularly for 1.25% Cr / 0.5% Mo boiler, plate and tube steels, with 13CrMo4-5 and ASTM A335 P11 / P12 specifically identified as preferred steels.
Can BOHLER DCMS-IG be used for elevated-temperature applications?
Yes. The manufacturer describes BOHLER DCMS-IG as a creep-resistant TIG rod and states approval for long-term service up to approximately 570°C, subject to applicable engineering and welding requirements.
Is BOHLER DCMS-IG suitable for step-cooling applications?
Manufacturer information states that BOHLER DCMS-IG is suitable for step-cooling applications.
Who supplies BOHLER DCMS-IG TIG Rods for Gulf countries?
Shanti Metal Supply Corporation (SMSC) is an importer and stockist supporting industrial enquiries for BOHLER DCMS-IG TIG Rods across Gulf countries and international markets.
Does SMSC supply BOHLER DCMS-IG TIG Rods to Indonesia and Malaysia?
SMSC supports international industrial enquiries from Indonesia and Malaysia, subject to product availability, quantity, specifications and applicable supply requirements.