BOHLER CM 9-IG TIG Rods Importer, Stockist & Supplier Worldwide
BOHLER CM 9-IG TIG Rods are low-alloyed, creep-resistant GTAW/TIG welding rods designed for welding applications involving 9% chromium and 1% molybdenum creep-resistant steels. Shanti Metal Supply Corporation (SMSC) is an Importer, Stockist, Supplier & Worldwide Exporter of BOHLER CM 9-IG TIG Rods for industrial customers.
BOHLER CM 9-IG is classified under AWS A5.28 / SFA-5.28 ER80S-B8 TIG Rods and EN ISO 21952-A W CrMo9Si TIG Rods. The product is used for suitable welding applications involving creep-resistant steels, high-temperature components, piping, tubes, forgings and equipment used in power-generation and petrochemical industries.
SMSC supports enquiries from the Gulf countries, including UAE, Dubai, Abu Dhabi, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain, as well as customers in Indonesia, Malaysia and other international markets.
Quick Answer: What is BOHLER CM 9-IG TIG Rod?
BOHLER CM 9-IG is a low-alloyed, creep-resistant TIG welding rod designed for suitable 9Cr-1Mo creep-resistant steel applications. It is classified as ER80S-B8 TIG Rods according to AWS A5.28 / SFA-5.28 TIG Rods and as W CrMo9Si according to EN ISO 21952-A. The rod is intended for GTAW welding of compatible alloy steels used in demanding elevated-temperature applications.
BOHLER CM 9-IG TIG Rods – Product Overview
BOHLER CM 9-IG is a solid filler rod for manual gas tungsten arc welding. Its 9Cr-1Mo type weld metal is designed for creep-resistant steel applications and is particularly relevant to welding similar alloyed steels used in thermal power and petrochemical service.
The product is suitable for joint welding of compatible tubes, pipes, plates and forgings where the welding procedure requires a 9% chromium and 1% molybdenum creep-resistant filler metal.
BOHLER CM 9-IG is also specified for suitable applications involving steels used for hot hydrogen service. Manufacturer information identifies the product for long-term service applications up to approximately 600°C, subject to the applicable welding procedure, material specification and service requirements.
BOHLER CM 9-IG TIG Rods Specifications
| Property | Details |
|---|---|
| Product Name | BOHLER CM 9-IG |
| Product Type | TIG Rod / GTAW Filler Rod |
| Product Category | Low-Alloyed Creep-Resistant Welding Consumable |
| Welding Process | GTAW / TIG |
| AWS Classification | A5.28 / SFA-5.28, ER80S-B8 |
| EN ISO Classification | EN ISO 21952-A, W CrMo9Si |
| Weld Metal Type | 9Cr-1Mo Creep-Resistant Weld Metal |
| Polarity | DC (-) |
| Shielding Gas | 100% Argon |
| Service Temperature Reference | Up to approximately 600°C, subject to application requirements |
BOHLER CM 9-IG Classification and Standards
| Standard | Classification |
|---|---|
| AWS | A5.28 / SFA-5.28, ER80S-B8 |
| EN ISO | 21952-A, W CrMo9Si |
The AWS and EN ISO classifications identify BOHLER CM 9-IG as a creep-resistant TIG filler metal for compatible Cr-Mo alloy steel welding applications.
BOHLER CM 9-IG TIG Rods Chemical Composition
The following values represent the typical analysis published for BOHLER CM 9-IG. Actual product chemistry should be confirmed from the applicable manufacturer's certificate or material documentation.
| Element | Typical Content wt.-% |
|---|---|
| Carbon (C) | 0.07 |
| Silicon (Si) | 0.40 |
| Manganese (Mn) | 0.50 |
| Chromium (Cr) | 9.00 |
| Molybdenum (Mo) | 1.00 |
BOHLER CM 9-IG TIG Rods Mechanical Properties
Typical all-weld-metal mechanical properties reported for BOHLER CM 9-IG are shown below. These values are provided as reference values and should not replace the requirements of the applicable WPS, project specification, inspection document or manufacturer's certificate.
| Condition | Yield Strength Rp0.2 | Tensile Strength Rm | Elongation A | Impact ISO-V |
|---|---|---|---|---|
| Typical value at 20°C | 530 MPa | 670 MPa | 24% | 220 J |
| Minimum reference value | ≥470 MPa | ≥590 MPa | ≥18% | ≥34 J |
Suitable Base Materials for BOHLER CM 9-IG
BOHLER CM 9-IG is intended for compatible 9Cr-1Mo creep-resistant steels and related materials. Typical base materials include:
- 1.7386 X11CrMo9-1
- 1.7388 X7CrMo9-1
- ASTM A182 Grade F9
- ASTM A213 Grade T9
- ASTM A217 Grade C12
- ASTM A234 Grade WP9
- ASTM A335 Grade P9
- ASTM A336 Grade F9
- ASTM A369 Grade FB9
- ASTM A387 Grade 9 / 9CR
- ASTM A426 Grade CP9
- Other compatible alloyed creep-resistant steels and castings
Base-material compatibility must be confirmed against the applicable material specification and qualified welding procedure before use.
BOHLER CM 9-IG TIG Welding Parameters
| Parameter | Recommended / Reference Information |
|---|---|
| Welding Process | GTAW / TIG |
| Polarity | DC (-) |
| Shielding Gas | 100% Argon |
| Typical Rod Diameter | Application dependent |
| Welding Current | Application and diameter dependent |
| Preheating | Approximately 250–350°C, depending on application |
| Interpass Temperature | Approximately 250–350°C |
| Post-Weld Heat Treatment | Tempering approximately 710–760°C for at least 1 hour, where specified |
Welding current, heat input, preheat, interpass temperature and post-weld heat treatment must be established according to the qualified WPS, base material, component thickness, applicable code and project requirements.
Preheating, Interpass Temperature and PWHT
For suitable BOHLER CM 9-IG applications, the referenced welding data specifies preheating and interpass temperatures in the range of approximately 250–350°C.
Where post-weld heat treatment is required, the referenced product data specifies tempering at approximately 710–760°C for at least one hour, followed by controlled cooling according to the applicable welding procedure.
The actual PWHT cycle must always follow the qualified WPS and applicable construction code. Manufacturer documentation and project specifications take priority over generic reference values.
BOHLER CM 9-IG TIG Rods Applications
BOHLER CM 9-IG TIG Rods are used for suitable welding applications where creep-resistant 9Cr-1Mo alloy steels are required. Typical application areas include:
- Thermal power plant equipment
- Power-generation piping systems
- High-temperature piping
- Boiler and pressure equipment applications
- Steam piping and related components
- Petrochemical industry equipment
- Oil refinery applications
- Hot hydrogen service applications
- Cr-Mo alloy steel tubes and pipes
- Cr-Mo alloy steel plates and forgings
- Maintenance and repair of compatible creep-resistant components
Advantages of BOHLER CM 9-IG TIG Rods
- Designed for 9Cr-1Mo creep-resistant steel welding
- AWS ER80S-B8 classification
- EN ISO W CrMo9Si classification
- Suitable for GTAW / TIG welding
- Low-alloyed creep-resistant filler metal
- Suitable for compatible elevated-temperature applications
- Applicable to tubes, pipes, plates and forgings
- Suitable for selected petrochemical and power-generation applications
- 100% Argon shielding gas reference
- Suitable for qualified welding procedures requiring this filler classification
BOHLER CM 9-IG TIG Rods Available Sizes
BOHLER CM 9-IG TIG Rods can be enquired for according to the required welding diameter, quantity and application.
| Rod Diameter | Availability |
|---|---|
| 1.6 mm | Subject to stock / enquiry |
| 2.0 mm | Subject to stock / enquiry |
| 2.4 mm | Subject to stock / enquiry |
| 3.0 mm | Subject to stock / enquiry |
| 3.2 mm | Subject to stock / enquiry |
Please provide the required diameter, quantity, application and destination when requesting a quotation so SMSC can review availability and supply requirements.
Storage & Handling of BOHLER CM 9-IG TIG Rods
TIG filler rods should be stored in clean and dry conditions and protected from moisture, contamination, oil, grease and other materials that can affect welding quality.
- Keep rods in their original packaging until required.
- Protect filler rods from moisture and contamination.
- Maintain clean handling practices during welding.
- Do not use contaminated or damaged rods without appropriate evaluation.
- Follow the manufacturer's storage and handling instructions.
BOHLER CM 9-IG TIG Rods Worldwide Export
Shanti Metal Supply Corporation (SMSC) supports international enquiries for BOHLER CM 9-IG TIG Rods as an Importer, Stockist, Supplier & Worldwide Exporter. Industrial customers can enquire for product availability, diameters, quantities, documentation and delivery requirements.
Gulf Countries
SMSC supports industrial supply enquiries for BOHLER CM 9-IG TIG Rods across Gulf markets including:
- UAE
- Dubai
- Abu Dhabi
- Saudi Arabia
- Qatar
- Oman
- Kuwait
- Bahrain
Indonesia & Malaysia
SMSC also supports enquiries from Indonesia and Malaysia for BOHLER CM 9-IG TIG Rods, subject to product availability, quantity, destination and applicable export requirements.
Why Choose SMSC for BOHLER CM 9-IG TIG Rods?
- Importer and stockist of industrial welding products
- Worldwide export support
- Supply support for Gulf countries
- International enquiries from Indonesia and Malaysia
- Product-focused technical information
- Support for diameter and quantity enquiries
- Industrial packaging and dispatch coordination
- Documentation support based on order requirements
- Customer-focused quotation process
- Support for industrial welding consumable requirements
How to Order BOHLER CM 9-IG TIG Rods from SMSC
To enquire about BOHLER CM 9-IG TIG Rods, buyers can provide the following information:
- Product name – BOHLER CM 9-IG
- Required rod diameter
- Required quantity
- Application or base material, where applicable
- Destination country
- Required technical or inspection documentation
- Required delivery schedule
SMSC can then review the requirement and provide availability and commercial details according to the requested quantity and destination.
Enquire for BOHLER CM 9-IG TIG Rods
Looking for a BOHLER CM 9-IG TIG Rods Importer, Stockist, Supplier or Worldwide Exporter? Contact Shanti Metal Supply Corporation (SMSC) with your required diameter, quantity, application and destination.
Request a QuoteFrequently Asked Questions About BOHLER CM 9-IG TIG Rods
What are BOHLER CM 9-IG TIG Rods?
BOHLER CM 9-IG is a low-alloyed, creep-resistant TIG welding rod designed for suitable 9Cr-1Mo alloy steel welding applications. It is classified as ER80S-B8 under AWS A5.28 / SFA-5.28 and W CrMo9Si under EN ISO 21952-A.
What is the AWS classification of BOHLER CM 9-IG?
BOHLER CM 9-IG is classified as AWS A5.28 / SFA-5.28 ER80S-B8.
What is the EN ISO classification of BOHLER CM 9-IG?
The EN ISO classification of BOHLER CM 9-IG is EN ISO 21952-A W CrMo9Si.
What type of welding process is used with BOHLER CM 9-IG?
BOHLER CM 9-IG is a TIG / GTAW filler rod intended for suitable manual gas tungsten arc welding applications.
What is the typical chemical composition of BOHLER CM 9-IG?
Typical analysis is approximately 0.07% carbon, 0.40% silicon, 0.50% manganese, 9.0% chromium and 1.0% molybdenum. Actual product chemistry should be confirmed from the applicable manufacturer certificate.
Which steels can be welded with BOHLER CM 9-IG?
BOHLER CM 9-IG is intended for compatible 9Cr-1Mo creep-resistant steels and related materials, including selected P9, T9, F9 and WP9 grades and comparable alloyed steels.
What industries use BOHLER CM 9-IG TIG Rods?
Typical industries include thermal power generation, petrochemical plants, oil refineries and other industrial applications involving compatible creep-resistant Cr-Mo steels and elevated-temperature service.
What shielding gas is used with BOHLER CM 9-IG?
The referenced operating data specifies 100% Argon as the shielding gas for TIG welding.
What is the service temperature of BOHLER CM 9-IG?
Manufacturer product information identifies BOHLER CM 9-IG for long-term service applications up to approximately 600°C, subject to the specific material, welding procedure and service conditions.
Does SMSC supply BOHLER CM 9-IG TIG Rods to Gulf countries?
SMSC supports industrial enquiries for BOHLER CM 9-IG TIG Rods across Gulf markets including UAE, Dubai, Abu Dhabi, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain, subject to availability and commercial requirements.
Does SMSC export BOHLER CM 9-IG TIG Rods worldwide?
Yes. SMSC supports worldwide export enquiries for BOHLER CM 9-IG TIG Rods, subject to product availability, quantity, destination and applicable international export requirements.
Does SMSC supply BOHLER CM 9-IG TIG Rods to Indonesia and Malaysia?
SMSC supports industrial enquiries from Indonesia and Malaysia. Customers can provide the required diameter, quantity and destination details for product availability and international supply review.
What information is required to order BOHLER CM 9-IG TIG Rods?
Buyers should provide the product name, required rod diameter, quantity, application or base material where applicable, destination country and any required technical or inspection documentation.
Our Other Products
Explore our range of high-quality products designed for industrial and engineering applications.
Conclusion
BOHLER CM 9-IG TIG Rods are low-alloyed, creep-resistant TIG welding consumables classified as ER80S-B8 under AWS A5.28 / SFA-5.28 and W CrMo9Si under EN ISO 21952-A. They are designed for suitable welding of compatible 9Cr-1Mo creep-resistant steels used in power-generation, petrochemical, refinery and elevated-temperature applications.
Shanti Metal Supply Corporation (SMSC) works as an Importer, Stockist, Supplier & Worldwide Exporter of industrial welding products. The Gulf countries are a primary international market, while SMSC also supports customers in Indonesia, Malaysia and other worldwide markets.
Industrial buyers can submit their required BOHLER CM 9-IG diameter, quantity, application and destination details to enquire about availability, stock and international supply.