BOHLER CM 5-IG TIG Rods Importer, Stockist & Supplier Worldwide
Shanti Metal Supply Corporation (SMSC) is an importer, stockist, supplier and worldwide exporter of BOHLER CM 5-IG TIG Rods for industrial welding, fabrication, power generation, pressure equipment, piping, petrochemical, engineering and maintenance requirements. SMSC supports industrial customers, contractors, fabricators, distributors and project procurement teams across the Gulf countries, Indonesia, Malaysia and other international markets.
BOHLER CM 5-IG is a low-alloyed, creep-resistant TIG rod designed for GTAW/TIG welding of compatible chromium-molybdenum steels and high-temperature applications. The product is classified under AWS A5.28 / SFA-5.28 ER80S-B6 TIG Rods and EN ISO 21952-A W CrMo5Si TIG Rods.
For buyers searching for a BOHLER CM 5-IG TIG Rod importer, BOHLER CM 5-IG stockist, BOHLER CM 5-IG supplier or BOHLER CM 5-IG exporter, SMSC provides specification-based supply support for domestic and international industrial requirements.
Quick Answer: What Are BOHLER CM 5-IG TIG Rods?
BOHLER CM 5-IG TIG Rods are low-alloyed, creep-resistant chromium-molybdenum welding rods designed for GTAW/TIG applications involving compatible 5% Cr 0.5% Mo steels and other high-temperature alloy steels. The product is classified under AWS A5.28 / SFA-5.28 ER80S-B6 TIG Rods and EN ISO 21952-A W CrMo5Si TIG Rods.
BOHLER CM 5-IG TIG Rods – Product Overview
BOHLER CM 5-IG is a chromium-molybdenum TIG rod intended for manual and mechanized gas tungsten arc welding. It is designed for creep-resistant welding applications where weld-metal strength, ductility and elevated-temperature performance are important considerations.
The product is particularly associated with welding 5% Cr 0.5% Mo steels and similar alloy steels used in high-temperature service. Suitable applications may include refinery equipment, pressure systems, high-temperature piping and other industrial components where compatible Cr-Mo filler metal is specified.
BOHLER CM 5-IG is suitable for applications involving elevated service temperatures, with manufacturer information indicating long-term service suitability up to approximately 650°C, subject to the applicable base material, engineering requirements and qualified welding procedure.
For international industrial buyers looking for a BOHLER CM 5-IG TIG Rod importer, BOHLER CM 5-IG stockist, ER80S-B6 TIG rod supplier, CrMo TIG welding consumable supplier or BOHLER welding rod exporter, SMSC can support enquiries based on product size, quantity and delivery destination.
BOHLER CM 5-IG TIG Rods Specifications
| Property | Specification / Information |
|---|---|
| Product Name | BOHLER CM 5-IG |
| Brand | BOHLER |
| Product Form | TIG Rod |
| Welding Process | GTAW / TIG |
| Product Category | Low-Alloyed, Creep-Resistant Welding Consumable |
| AWS Classification | AWS A5.28 / SFA-5.28 ER80S-B6 |
| EN ISO Classification | EN ISO 21952-A W CrMo5Si |
| Alloy System | Chromium-Molybdenum |
| Shielding Gas | Argon / EN ISO 14175 I1 |
| Service Application | Creep-Resistant and Elevated-Temperature Welding Applications |
| Typical Steel Category | 5% Cr 0.5% Mo Steels |
| Business Type | Importer, Stockist, Supplier & Worldwide Exporter |
| Primary Export Focus | Gulf Countries |
| Other Export Markets | Indonesia, Malaysia & Other Worldwide Markets |
BOHLER CM 5-IG Classification and Standards
Correct identification of welding consumables is important for procurement, welding procedure qualification and project documentation. BOHLER CM 5-IG is identified under internationally recognized filler-metal classification systems for chromium- molybdenum creep-resistant welding applications.
| Standard | Classification |
|---|---|
| AWS A5.28 / SFA-5.28 | ER80S-B6 |
| EN ISO 21952-A | W CrMo5Si |
| Product Type | Low-Alloyed, Creep-Resistant TIG Rod |
| Welding Process | GTAW / TIG |
| Alloy System | Cr-Mo |
Typical Chemical Composition of BOHLER CM 5-IG TIG Rods
The following values are provided as typical technical reference information. Chemical composition may vary according to the applicable product specification and batch. For project-critical applications, buyers should verify the current manufacturer technical documentation and material certificate for the specific product supplied.
| Element | Typical Content (wt. %) |
|---|---|
| Carbon (C) | 0.08 |
| Silicon (Si) | 0.40 |
| Manganese (Mn) | 0.50 |
| Chromium (Cr) | 5.60 |
| Molybdenum (Mo) | 0.60 |
| Balance | Iron and residual elements |
Mechanical Properties of BOHLER CM 5-IG All-Weld Metal
Mechanical properties of deposited weld metal depend on welding conditions, heat treatment, test temperature, joint configuration and other procedure variables. For critical applications, the applicable BOHLER technical documentation and qualified welding procedure should be followed.
| Property | Technical Consideration |
|---|---|
| Weld Metal Type | Cr-Mo Creep-Resistant Weld Metal |
| Tensile Performance | Depends on welding condition and heat treatment |
| Yield Strength | Depends on applicable classification and testing condition |
| Elongation | Depends on welding procedure and test condition |
| Impact Properties | Depends on welding condition and applicable testing requirements |
| High-Temperature Performance | Designed for creep-resistant and elevated-temperature applications |
For pressure equipment, refinery components and other safety-critical applications, mechanical-property requirements should be confirmed against the applicable project specification, material standard and qualified welding procedure.
Suitable Base Materials for BOHLER CM 5-IG TIG Rods
BOHLER CM 5-IG is intended for suitable welding applications involving 5% Cr 0.5% Mo steels and similar chromium-molybdenum high-temperature steels. The exact filler-metal selection should always be confirmed against the base-material grade and applicable welding procedure.
| Material / Application Category | Examples |
|---|---|
| 5% Cr 0.5% Mo Steels | X12CrMo5 and similar compatible Cr-Mo steels |
| ASTM Grade P5 Steels | ASTM P5 / compatible Grade P5 materials |
| Pressure and Boiler Applications | Selected Cr-Mo pressure and boiler steels |
| High-Temperature Piping | Suitable 5% Cr 0.5% Mo piping materials |
| Alloy Steel Castings | Similar-alloyed compatible cast steels |
| Refinery Equipment | Compatible high-temperature Cr-Mo components |
Welding Parameters for BOHLER CM 5-IG TIG Rods
BOHLER CM 5-IG welding parameters should be selected according to rod diameter, base-metal thickness, joint preparation, welding position, heat input and the qualified welding procedure. The following information provides general process guidance and should be validated against the applicable WPS before production welding.
GTAW / TIG Reference Parameters
| Parameter | Reference |
|---|---|
| Welding Process | GTAW / TIG |
| Shielding Gas | Argon / EN ISO 14175 I1 |
| Polarity | DC Negative / DCEN |
| Current Type | Direct Current |
| Preheat / Interpass | Approximately 150–300°C, depending on application |
| Post-Weld Heat Treatment | According to base material, code and qualified WPS |
Preheating, Interpass Temperature and Post-Weld Heat Treatment
Preheating and interpass temperature control are important when welding chromium-molybdenum steels. For BOHLER CM 5-IG applications, technical information references a preheat and interpass temperature range of approximately 150°C to 300°C, depending on the material and application.
Post-weld heat treatment may be required depending on the base material, component thickness, service conditions and applicable engineering specification. Manufacturer information references post-weld tempering in the approximate range of 730°C to 760°C for applicable applications.
The exact preheat, interpass and PWHT requirements must be established from the base-material specification, applicable construction code, project specification and qualified welding procedure.
Applications of BOHLER CM 5-IG TIG Rods
- Oil refinery equipment fabrication
- Petrochemical industry applications
- Cr-Mo steel welding
- 5% Cr 0.5% Mo steel fabrication
- High-temperature piping
- Pressure equipment fabrication
- Boiler and heat-service components
- Power-generation equipment
- Pressure-service components
- High-temperature steel maintenance and repair
- Industrial engineering and fabrication
- GTAW / TIG welding of compatible Cr-Mo steels
Advantages of BOHLER CM 5-IG TIG Rods
- Low-alloyed creep-resistant weld-metal design.
- Designed for 5% Cr 0.5% Mo steel applications.
- Chromium-molybdenum alloy system.
- Suitable for elevated-temperature welding applications.
- Suitable for GTAW / TIG welding.
- Classified under AWS A5.28 / SFA-5.28 ER80S-B6.
- Classified under EN ISO 21952-A W CrMo5Si.
- Suitable for selected refinery and petrochemical applications.
- Suitable for pressure and high-temperature service applications.
- Available in multiple TIG rod diameters subject to availability.
Available Sizes of BOHLER CM 5-IG TIG Rods
BOHLER CM 5-IG TIG rods are available in standard diameters and lengths subject to product availability and packaging requirements. Commonly referenced dimensions include the following.
| Diameter | Typical Length | Product Form |
|---|---|---|
| 1.6 mm | 1000 mm | TIG Rod |
| 2.0 mm | 1000 mm | TIG Rod |
| 2.4 mm | 1000 mm | TIG Rod |
| 3.0 mm | 1000 mm | TIG Rod |
Storage and Handling of BOHLER CM 5-IG TIG Rods
TIG filler rods should be stored under suitable conditions to help protect them from moisture, dust, oil, grease and other contamination. Keeping welding consumables clean and properly identified before use helps support consistent welding performance.
- Store rods in clean and dry conditions.
- Keep products protected from moisture and contamination.
- Maintain original product identification and packaging where possible.
- Do not mix different filler-metal classifications.
- Verify product designation before welding.
- Protect rods from oil, grease and foreign material.
- Follow applicable manufacturer handling recommendations.
BOHLER CM 5-IG TIG Rods Exporter Worldwide
Shanti Metal Supply Corporation (SMSC) supports worldwide export enquiries for BOHLER CM 5-IG TIG Rods. The company serves industrial buyers, engineering contractors, fabrication companies, distributors, maintenance companies and project procurement teams requiring welding consumables for international projects.
The Gulf region is a primary international market for SMSC, while the company also supports enquiries from Indonesia, Malaysia and other international markets, subject to product availability, commercial terms and applicable export requirements.
Customers can submit the required product designation, diameter, quantity and delivery destination so that product availability and international supply requirements can be reviewed.
BOHLER CM 5-IG TIG Rods Supplier for Gulf Countries
SMSC has a particular supply focus on the Gulf countries, supporting industrial welding and fabrication requirements for power-generation, oil and gas, petrochemical, pressure-equipment, piping, engineering and maintenance projects.
- BOHLER CM 5-IG TIG Rods Supplier in UAE
- BOHLER CM 5-IG TIG Rods Supplier in Dubai
- BOHLER CM 5-IG TIG Rods Supplier in Abu Dhabi
- BOHLER CM 5-IG TIG Rods Supplier in Saudi Arabia
- BOHLER CM 5-IG TIG Rods Supplier in Qatar
- BOHLER CM 5-IG TIG Rods Supplier in Oman
- BOHLER CM 5-IG TIG Rods Supplier in Kuwait
- BOHLER CM 5-IG TIG Rods Supplier in Bahrain
BOHLER CM 5-IG TIG Rods Supplier in Indonesia and Malaysia
SMSC also supports industrial enquiries from Indonesia and Malaysia. Industrial buyers, fabrication companies, engineering contractors, maintenance companies, distributors and procurement teams can submit their requirement with the exact product designation, rod diameter, quantity and delivery destination.
Why Choose Shanti Metal Supply Corporation (SMSC)?
- Importer and stockist for industrial welding-product requirements.
- Supplier and exporter supporting worldwide industrial enquiries.
- Primary international market focus on Gulf countries.
- Additional supply support for Indonesia and Malaysia.
- Worldwide export support subject to availability and export requirements.
- Support for bulk and project procurement requirements.
- Specification-based product enquiry support.
- Support for industrial fabrication and engineering buyers.
- Product enquiry assistance for BOHLER welding consumables.
How to Order BOHLER CM 5-IG TIG Rods
To request availability, pricing or a quotation from Shanti Metal Supply Corporation (SMSC), provide the following information for accurate product identification and faster enquiry processing.
- Product Name: BOHLER CM 5-IG
- Required Diameter: For example 1.6 mm, 2.0 mm, 2.4 mm or 3.0 mm.
- Required Quantity: Number of packs or total quantity required.
- Destination Country: UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Indonesia, Malaysia or another international destination.
- Application: Where applicable, provide the intended welding application, base material or project requirement.
- Documentation: Specify any required certificates, inspection documents, technical datasheets or project documentation.
Need BOHLER CM 5-IG TIG Rods?
Contact Shanti Metal Supply Corporation (SMSC) for BOHLER CM 5-IG TIG Rod availability, stock details, quotation and worldwide export requirements.
Frequently Asked Questions About BOHLER CM 5-IG TIG Rods
What are BOHLER CM 5-IG TIG Rods?
BOHLER CM 5-IG is a low-alloyed, creep-resistant chromium-molybdenum TIG rod designed for suitable GTAW welding applications involving 5% Cr 0.5% Mo steels and other compatible high-temperature steels.
What is the AWS classification of BOHLER CM 5-IG?
BOHLER CM 5-IG is classified under AWS A5.28 / SFA-5.28 as ER80S-B6.
What is the EN ISO classification of BOHLER CM 5-IG?
The product is identified under EN ISO 21952-A as W CrMo5Si.
What is BOHLER CM 5-IG used for?
BOHLER CM 5-IG is used for suitable TIG/GTAW welding applications involving 5% Cr 0.5% Mo steels, refinery equipment, pressure-service components, high-temperature piping and other compatible chromium-molybdenum steel applications.
What is the typical chemical composition of BOHLER CM 5-IG?
Typical reference chemistry includes approximately 0.08% carbon, 0.40% silicon, 0.50% manganese, 5.60% chromium and 0.60% molybdenum, with iron and residual elements forming the balance. Exact chemistry should be verified against the applicable product documentation and certificate.
What welding process is used with BOHLER CM 5-IG?
BOHLER CM 5-IG is used for gas tungsten arc welding, also known as GTAW or TIG welding, including suitable manual and mechanized applications.
What shielding gas is used for BOHLER CM 5-IG TIG welding?
Argon is used as the shielding gas for applicable GTAW operation, with EN ISO 14175 I1 referenced for the shielding-gas classification. The exact gas specification and flow rate should follow the approved welding procedure.
Can BOHLER CM 5-IG be used for elevated-temperature applications?
Yes. BOHLER CM 5-IG is designed as a creep-resistant welding consumable for elevated-temperature applications involving compatible chromium-molybdenum steels. Manufacturer information indicates long-term service suitability up to approximately 650°C, subject to applicable engineering and welding requirements.
What are the available sizes of BOHLER CM 5-IG TIG Rods?
Commonly referenced sizes include 1.6 mm, 2.0 mm, 2.4 mm and 3.0 mm diameters, generally supplied in 1000 mm lengths, subject to product availability.
Who supplies BOHLER CM 5-IG TIG Rods for Gulf countries?
Shanti Metal Supply Corporation (SMSC) is an importer, stockist and supplier supporting industrial enquiries for BOHLER CM 5-IG TIG Rods, with a particular international supply focus on Gulf countries.
Does SMSC supply BOHLER CM 5-IG TIG Rods to Indonesia and Malaysia?
SMSC supports international industrial enquiries from Indonesia and Malaysia, subject to product availability, quantity and applicable supply or export requirements.
Does SMSC export BOHLER CM 5-IG TIG Rods worldwide?
Yes. SMSC supports worldwide export enquiries for BOHLER CM 5-IG TIG Rods, subject to product availability, quantity, destination and applicable international export requirements.
What information is required to order BOHLER CM 5-IG TIG Rods?
Buyers should provide the product name, required rod diameter, quantity, application where applicable, destination country and any required technical or inspection documentation.
Our Other Products
Explore our range of high-quality products designed for industrial and engineering applications.
Conclusion
BOHLER CM 5-IG TIG Rods are low-alloyed, chromium-molybdenum welding consumables designed for suitable GTAW applications involving 5% Cr 0.5% Mo steels and other compatible high-temperature steel applications. The product is classified under AWS A5.28 / SFA-5.28 ER80S-B6 and EN ISO 21952-A W CrMo5Si.
Shanti Metal Supply Corporation (SMSC) works as an importer, stockist, supplier and worldwide exporter of industrial welding products. The Gulf countries are a primary international market, while SMSC also supports customers in Indonesia, Malaysia and other worldwide markets.
Industrial buyers can submit their required BOHLER CM 5-IG diameter, quantity, application and destination details to enquire about availability, stock and international supply.